Pinned Tweet
A lot of you have offered to and asked how you can support the lathe build, and since this is all so new to me, I didn’t really know how to answer that and haven’t felt comfortable just straight up asking people for money or specific parts. So after getting some suggestions and input from others, I finally set up something I feel comfortable with. No pressure at all, following along and sharing the build honestly helps just as much.
To be clear, I’m completely okay with funding this entire thing myself, I just can’t make any real promises on when it would be done. As the design grew into v2, the parts list grew with it and ended up costing way more than I originally intended. I’m a college student paying my own way through school, so I’ve been covering what I can with my own money and by returning parts I no longer need, and any help keeps me on track to have it running and cutting by this spring semester.
If you’re interested in supporting the build along the way, I started a Patreon at patreon.com/VinnyDynamics. Tiers start at $5 and range from your name in the credits of the open source release up to the in-depth engineering behind every decision (the calcs, the FEA and why each part ended up the way it did), early access to the CAD before it goes public, and a monthly Q&A. The first 30 founding members also get their name on a founders plate on the lathe and a custom stainless steel ring made on it once it’s cutting.
If you’d rather do a one-time thing, X Money works right from my profile, or Venmo (Vinnymace). And if you’d rather talk privately or want to help with a specific part, feel free to DM me.
Everything goes open source once it’s proven, so the CAD stays free no matter what, and nothing changes about the updates here on X. Patreon just gets the extra niche technical stuff like the actual FEA reports and calcs. I love showing anyone and everyone interested the build and progress on here, so none of that is going anywhere. The card below shows exactly where the money goes.
Huge thank you to the anonymous supporter who sent the first bit through X Money, to Clay (@SCH_Clay) for the servo, and of course @sendcutsend, thank you guys for being the first to back the project. Never expected any of this from what started as a passion project.
Feel free to drop any questions or concerns under this post. I’d really like feedback, especially on the Patreon side, since I had no idea what should be included in the tiers or what they should cost. I want this project to be for everyone, hence the decision to go fully open source, so don’t hesitate to give suggestions on how I could approach this better for everyone who’s graciously decided to follow along.
Got 2 quizzes I'm bouta go take that I lowkey sacrificed my grades on to work on this project last night so want some opinions, does this look fire or am I stupid? I have a piece of titanium I'm gonna make the name/sponsor plate out of and give it the classic burnt titanium finish with @sendcutsend @SCH_Clay @genZmfg 's name and my name on it milled out of a 4mm thick piece of the stock I have. Got told that since its a custom lathe I shouldn't go with traditional coloring/styling and I've always loved the Gulf livery's color scheme and I honestly really like this but I might just be blind so lmk pls 🙏
2
13
377
We got ourselves a 1.5 kW spindle servo! Took about 3 weeks to get here but that's alright, again huge thanks to @SCH_Clay for sponsoring this part of the build, incredibly excited for this. And I 100% will be posting a video tonight testing it here in my room's outlets and seeing what happens 😂
1
20
515
This project is starting to feel more and more real as the days go on, crazy to think this was just an idea 4 months ago and now we got the axis drive motors
2
24
954
Messing around some potential color scheming options to powder coat the sheet metal pieces, leaning towards the orange with this setup but anyone got any other suggestions?
Ayyy we got our 3000w transformer, lowkey scared to test the servo in my apartment on its shitty 1950s 15A circuits but hey, we shall see what happens when that gets here
3
18
675
Finally just put in a big parts order for the v2 lathe with @sendcutsend, got 19 laser cut and bent parts for stuff like the motor mount, belt cover, backsplash, ship tray, and others (everything in orange). Spent a good amount of time the past two days checking and rechecking these parts so that hopeful nothing needs correcting or can't be done properly. (First time actually designing for sheet metal) Once again just wanna say a huge thank you to @sendcutsend for offering support on the build so, cant wait to get the parts in sometime next week.
The waiting is over, lathe parts are finally being cut. Its taken some time to iron things out since making the v2 changes but now that I know which parts are final and not changing, stuff is gettin made. Unfortunately only had 2 hours to spare today for the shop so just started getting this nice ole block of 17-4 PH squared to get ready to start being milled into 2 of the tool blocks starting on monday. Also took a while to find a shell mill that had the right inserts to cut this stuff cleanly and shiii did it do a great job, unfortunately lacking on good carbide here but we make do.
1
19
583
Obtained some incredible pieces of stock from my friend @genZmfg which I am incredibly grateful for, we got the 17-4 PH that will attempted, key work attempted to be used to make the tool blocks IF i can actually machine it in my schools shop lol. A big ole chunk of titanium, a rod of Inconel that I have no idea what to do with and some good ole 1018 steel which will likely be one of or the first piece of stock used to do tap tests and see how well my models hold up. Also some other useful goodies that'll be helpful throughout the build process, again thank you Ryan 🙏
Ayyy, first @noxmetals order for the lathe just came in, excited to finally get to actually cutting metal. I actually ordered this back before this project blew up for the v1 design and as I have mentioned, the design has changed massively since then so not all of it is going where it was originally intended lol. Got the cast plate for the carriage which luckily still fits, still using the 6061 foot flange pieces + end caps, and the big ole 4" round that was meant to be the spindle pulley is now being turned into the encoder drive cap/mounting enclosure but hey at least its getting used. Gonna end up using the rest for other random little bits and pieces, and some fixtures most likely so it ain't going to waste. Also honestly really cool they take the time to write hand written notes like this seemingly for every customer especially given the relatively small size and cost of this order. Really impressed with everything about this order and the process and simplicity of it. Massive kudos to the team over there at Nox
2
19
892
Finally get to start cutting metal soon! Should start seeing actual parts being made in the shop over the next few weeks!
9
449
To add to the last 2 more serious posts, face reveal i guess lmao, wanted my profile to not look like a shitty throw away account anymore and to take this a bit more serious
3
351
As I promised, I ended up working on v2 pretty much all day yesterday, stayed up till close to 3am lmao and then have been working on getting it as close to finished since I've been back from our FSAE test day around noon today. In that time,I raised the headstock 8 mm, switched the way covers to off the shelf bellows, and finished the swappable steel gang blocks in CAD.
The raise came from making the steel plate under the headstock thicker, so nothing else on the headstock changed (headstock itself will likely be upgraded down the road). Long parts went from about 2.6 in to 3.2 in diameter, which is right at what the chuck can grip, and it only costs about 2% stiffness at the front turning tool. The chuck itself is also one of the things that will eventually need to change as the 4" is the limiting factor now.
The tool blocks are 4140 pre-hard holders that bolt to the cross slide in a front and back row, so tools can get swapped or rearranged without touching the rest of the machine. Parting runs off the back row with the spindle in reverse.
Way covers are off the shelf now too, a flat pleated cover on the headstock side and a McMaster bellows cut down for the tail side, about $77 for both instead of a custom set.
The 1.5 kW servo should land in the next couple weeks, so hopefully I'll be able to get that setup on a test rig with the headstock soon and start testing the intended setup and figuring out the specifics of how they will actually integrate with each other outside of the perfect world of CAD.
Please give any new feedback, as always thank yall for the support 🙏
Imma try and finish updating the CAD for this new version today, will stay up till 3am again if I have to. Will keep yall posted on how this turns out, will be looking for suggestions/critiques because the whole point of v2 is to take what everyone has said into account and improve on the things I missed on v.5 and v1. I have my gaps so I appreciate any real insight/advice on what I may still be messing up🙏
2
5
525


























