Nevermind. Grok says no.
**No — not for Starship’s reentry tiles.** The new material is an impressive room-temperature insulator, but it fails the temperature, environment, thickness, and durability requirements of a reusable orbital heat shield.
Starship uses ~18,000 hexagonal low-density silica-ceramic tiles (fibrous silica network, mostly air, with a high-emissivity borosilicate or MoSi2 coating). Surface temperatures during reentry reach ~1,400–1,650 °C. The tiles must stay attached, survive plasma, thermal shock, vibration, rain, and many flights while keeping the 304L stainless-steel hull below ~800 °C. Typical conductivity for this class of tile is ~0.06 W/m·K at 300 °C and rises with temperature.
The NC State material is a 2-D hybrid organic-inorganic perovskite thin film (azobenzene ethyl ammonium lead iodide). It has very low conductivity (~0.04 W/m·K at room temperature) and is unusually stiff for that conductivity. It can be printed as a scalable coating. Those properties are real and useful for electronics, cookware, or moderate-temperature insulation.
They do not transfer to Starship TPS:
- **Temperature limit.** Hybrid lead-halide perovskites (including 2-D layered versions with organic spacers like azobenzene or phenethylammonium) typically lose the organic components and collapse between ~150–300 °C. Even the more stable compositions used in solar cells degrade under prolonged 85 °C stress. Reentry is an order of magnitude hotter. The leftover PbI₂ would not function as a reusable high-temperature insulator.
- **Form factor.** It is a thin film. Starship tiles are ~3 cm thick so that the temperature drop and thermal mass keep heat from reaching the steel. A coating a few microns or tens of microns thick cannot do that job.
- **Environment.** The material contains organics and lead iodide. It is sensitive to moisture, oxygen, UV, vacuum outgassing, and radiation — all present on the windward side of Starship. Existing tiles use a glassy coating specifically to resist atomic oxygen and plasma.
- **Other mismatches.** Density is higher than silica foam tiles. Coefficient of thermal expansion, plasma erosion resistance, rain/erosion durability, and high-temperature emissivity are unproven and almost certainly inadequate. Lead content is also undesirable on a reusable vehicle.
A thin coating of this perovskite on the *back* of existing tiles or as an internal layer in a multi-layer stack is theoretically possible for extra insulation at lower temperatures, but that is not what the tiles themselves do. SpaceX is still iterating on silica-ceramic formulations, attachment (“crunch wrap”), and coatings because those materials already operate in the required temperature regime. This perovskite does not. The paper’s mention of “space travel” is generic; it does not claim reentry-capable TPS.
48
Travelers to Texas. Welcome y'all. One favor to ask please. Try the brisket without any sauce first. Not against sauces, but yeah it's kind of a thing.
2
56
Just eating a PBJ and remembered this. instagram.com/reel/DAvqX_8PJ…
30
Steve Bolander retweeted
some photos from Patagonia Spring 1998 catalog
so interesting to see the contrast with the modern outdoors recreation editorial style
Interesting flight path, but nothing to worry about SATX. Just tax dollars at work with an FAA flight check to verify radar coverage at KSAT approaches/departures. Beautiful bird too.
180
Temperature scale I use in parenthesis.
What is yours ?
-18°C to 0°C: 0°F to 32°F (Freezing)
1°C to 11°C: 33°F to 52°F (Chilly)
12°C to 22°C: 53°F to 72°F (Cool comfort)
23°C to 33°C: 73°F to 92°F (Warm)
34°C to 43°C: 93°F to 110°F (Hot)
41







