Lemus (@lemusdev) profile picture
Joined November 2023
ro-mono-303 0.1.3 beta: a free, open-source TB-303 emulation. It runs the 303's own sequencer firmware (bring your ROM), with the voice modelled part by part and measured against a real unit. macOS and Windows. lemusdev.org/ro-mono-303
3
7
150
Not affiliated with Roland. Roland and TR-909 are trademarks of Roland Corporation.
2
Want more machines? Lemus is free and open source, and it grows by word of mouth. Share the page, post what you make with it, tell a friend. Requests go to the forum: lemus.discourse.group
1
2
In DAWs that report their loop points (Cubase and Bitwig do), the 909 starts again exactly on the wrap; in one that doesn't, up to one audio block late. Checked in the built plugin: a one-bar loop, every pass compared with the first, at 87 to 199 BPM.
1
20
That turned up a quirk of the real firmware: it reads start and stop on its panel scan, about every 2 ms, and a start that comes sooner after a stop gets mixed up with it. The 909 then plays one step and stops. So they're kept 4 ms apart.
1
Now a loop wrap, or a jump on the timeline, stops the 909 and starts it again at the new place, as a DAW's MIDI clock output does to the hardware.
1
The plugin only ever sent the clocks after the last one it had sent. When the loop jumped back, there were none left to send until the playhead passed the old spot again, and inside a loop it never does. So the 909 sat waiting.
1
How it went wrong: the plugin runs the TR-909's real firmware on an emulated CPU. In HOST sync, the DAW's transport becomes MIDI clock for it, the way a sequencer drives a real 909 through its MIDI IN: 24 clocks a beat, plus start and stop.
1
5
Clicking elsewhere on the timeline while playing now picks the pattern up there, in time. A start from a pre-roll, or from between two 16ths, now lands in step with the DAW. lemusdev.org/ro-drums-909
1
8
A new version of ro-drums-909 (Roland TR-909) is out: 0.2.5. Free and open source, as always. With SYNC on HOST and the DAW's loop on, the 909 now plays every pass of the loop. Before, it stopped at the loop's end and stayed silent.
1
24
Hardfloor's Acperience (1992) put its TB-303 through ProCo RATs. Which ones isn't on record, but any RAT of the time had the LM308 this one models: ro-mono-303 into pr-dist-r is that chain.
2
Not affiliated with Pro Co Sound or Rapco International. ProCo and RAT are trademarks of their owners.
1
2
Want more machines? Lemus is free and open source, and it grows by word of mouth. Share the page, post what you make with it, tell a friend. Requests go to the forum: lemus.discourse.group
1
8
No ROM needed. INPUT in the bar is a gain in front of the pedal, since in most DAWs the fader comes after the plugin. Or install it with the Lemus Plugin Manager: lemusdev.org/plugin-manager What still differs: lemusdev.org/pr-dist-r#diffe… User guide: lemusdev.org/pr-dist-r/guide
1
7
The pots: DISTORTION and VOLUME turn as the one measured vintage RAT pot does (1979, 10.1 % of its resistance at half turn); FILTER is fitted to the 1984 pedal. The panel is measured from photos of 1984 units.
1
1
Checked against real pedals: a capture of a real 1984 White Face (level-matched, within 0.9 dB per band above 2 kHz on a guitar, 0.2 dB on a TB-303 line), a 1990 RAT 2's published scope shots, and Aalto University's recordings of a real RAT.
1
8
Checked against a SPICE simulation of the same circuit, within −46 to −86 dB, and its small-signal response to 0.01 dB. The original RAT's part values, not the RAT 2's, which changed four of them when it added the LED.
1
4
The whole circuit, component by component: the input network, the LM308 gain stage with its 30 pF compensation, DISTORTION, the clipping diodes, FILTER, the 2N5458 buffer and VOLUME, solved together as one circuit at 8x oversampling.
1
9
pr-dist-r 0.1.0, the first release of a ProCo RAT emulation, is out: the original RAT as the 1984 "White Face" small box, with its LM308. It's a beta, free and open source. AU and VST3; macOS 11+ (universal) and Windows 10+ (x64). lemusdev.org/pr-dist-r
1
4
53
Lemus plugins have been downloaded 8,479 times so far: 5,474 for Windows and 3,005 for macOS.
14